Plastics To Oil Making Machine

The cooling system is very important in the process of pyrolysis, which is closely related to the oil yield rate. Therefore, oil yield rate can be guarantee if cooling effect is better. Our company has been achieved a big success on cooling system for several years of research and improvement. Our new design for semi-solid slurry equipment is that the volume of horizontal condenser is three times the size of vertical condensers, so the cooling effect can be guaranteed.

Features of plastic to oil making equipment:

1. We design a new more efficient and scientific path to reach indirect heating, which can make the reactor life longer 3- 4 times than the common machine;

2.With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam;

3.The raw materials are cheaper and we will get valuable output products from waste plastic like fuel oil and carbon black.

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Product Certification