Plastic Waste Recycling Units

Pyrolysis is the efficient method of hazardous waste disposal and recovery of valuable materials, the main materials are waste plastic, tyre and medical, the final products you get from plastic waste recycling pyrolysis machine is crude oil. For waste plastic pyrolysis units, cooling system is very important, which is closely related to the oil yield rate. Therefore, oil yield can be guaranteed if cooling effect is better. Our company has been achieved a big success on cooling system for several years of research and improvement. Our new design for semi-solid slurry equipment is that the volume of horizontal condenser is three times the size of vertical condensers, so the cooling effect can be guaranteed.

Features of plastic waste recycling pyrolysis unit:

1. It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. but our special design  is hydro seal and gas gun, which is not only guarantee the safety but also can save the fuel;

2. Extra gas purifying system, remove chemical and impurity system to clean and energy recycling;

3. There is no pollution to the environment because of advanced dedusting system;

4. With auto welding machine for waste tire oil pyrolysis plant, it can not only greatly improve working efficiency but also guarantee the welding quality.

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Product Certification