Pyrolysis Of Plastic Waste In Africa

Pyrolysis Of Plastic Waste In Africa

More than 10 million scrap plastics are produced in South Africa every year and it is estimated that between 60 and 100 million plastics are lying around as waste.  Therefore, we need to properly handle these waste plastic in Africa with the help of  pyrolysis plant, first of all, we should put the raw material into reactor door, seal the feed inlet system, then the reactor will slowly be heated ,when the temperature reaches around 250 °C, oil gas will be seen. Thirdly, oil gas will go to cooling system to be cooled into liquid by the water cooling. After oil comes out fully, the temperature of reactor will go down, meanwhile, carbon black will be discharged automatically.

Advantages of plastic waste pyrolysis machine :

1. In the dedusting system, three specifically designed steps are used to dedust the hot smoke, which can ensure the released smoke is clean;

2. We use renewable heating method, which can not only save fuel but also strengthen the life span of reactor;

3. The process can be effectively applied to all plastic materials for recycling and generation of commercially valuable products;

4. Advanced heating system and fire directly heating to increase heating efficiency to 20% and save energy to 15-20%.

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Product Certification