Plastic To Fuel Conversion Process

Plastic To Fuel Process

In fact, the plastic to fuel conversion process can be also called plastic pyrolysis process. The plastic waste will be eventually converted intto fuel oil, carbon black and some gas by pyrolysis equipment. In general, the plastic to fuel process can be described as follows:

Plastic To Oil Machine For SaleFor Sale
Plastic To Oil Machine For Sale

Firstly, put waste plastics into pyrolysis reactor by auto-feeder, then heat the reactor with coal/wood/natural gas/oil. when the temperature reach around 250 degree celsius oil gas will produce.

Secondly, liquid oil will be cooled out by cooling system from oil gas, which is collected by oil tank.

Thirdly, the waste gas which can not be cooled in normal pressure will be recycled to heat reactor, this not only saves the energy, but also protects our environment.

Fourthly, the dark smoke produced by heating reactor can achieve national emission standard through dual desulfurization and dusting removal device.

Fifthly, the temperature of reactor will be low after we get fuel oil, and at the same time, the carbon black will be discharged automatically.

Application of Final Products:

NO. Name Usage
1 Pyrolysis oil • can be sold directly.
• Reprocessed into diesel and  by waste oil distillation machine.
• can be used as fuel for iron factory, power plant, cement factory, restaurant, etc.
2 Carbon black • can be sold directly.
• Reprocessed into high quality carbon by the carbon black processing machine.
• make carbon brick by briquetting equipment.
3 Combustible  gas • can be used as fuel heating the pyrolysis reactor.

As the domestic leading manufacturer and supplier of pyrolysis equipment, Beston waste plastic to fuel conversion plant not only has the features of increasing oil output 5%, saving energy 30%-40%, but also ensures safety 100%.  Our plants mainly have the following models: they are batch type(BLJ-06 and BLJ-10), semi-automatic type(only BLJ-16), continuous type(BLL-20).  And their daily capacity ranges from 6 tons to 24 tons. The followings are detailed information about their parameters:

Model: BLJ-6
Daily capacity: 6 MT
Working method: Batch
Total power: 24 kw/h
Reactor size: D2.2*L6.0m

BLJ-10 pyrolysis plant
Model: BLJ-10
Daily capacity: 8-10 MT
Working method: Batch
Total power: 30 kw/h
Reactor size: D2.6*L6.6m

BLL-16 Semi-automatic pyrolysis plant
Model: BLJ-16
Daily capacity: 15-20MT
Working method: Semi-Continuous
Total power: 54 kw/h
Reactor size: D2.8*L7.1m

Model: BLL-20
Daily capacity: 20-24 MT
Working method: Fully continuous
Total power: 71.4(kw/h)
Reactor size: L1.4*L11m

After-sales Service:

1. Delivery Time: It will be 45 working days after we receive the deposit.

2. Installation and Training: Our company will send one technician for each set of machine for guiding your installation, testing the machine and training your workers. The installation period shall be one month; over one month, you have to pay extra salary for the technician.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Your Industry(required):

    Your Name(required):

    Your Email(required):

    Your Tel(required):

    Your Country:

    Your Company:

    Your Message(required):