Plastic Waste Recycling Into Oil Machinery

Fully automatic pyrolysis plant

We have various of types of waste tire to energy, such as BLJ-6, BLJ-10, BLL-16, BLL-20, the main raw materials of all pyrolysis plant are waste tyre, plastic and waste medical, the final products we get are fuel oil, carbon black and steel wires, and the working process of pyrolysis machine is the same, first of all, we should put the raw material into reactor door, seal the feed inlet system, then the reactor will slowly be heated, when the temperature reaches around 250 °C, oil gas will be seen. Thirdly, oil gas will go to cooling system to be cooled into liquid by the water cooling. After oil comes out fully, the temperature of reactor will go down, meanwhile, carbon black will be discharged automatically.

Features of waste plastic recycling pyrolysis machine:

1.With an auto welding machine for the reactor, it can not only greatly improve working efficiency of pyrolysis plant, but also guarantee the quality of welding seam

2.Advanced heating system and fire directly heating to increase heating efficiency to 20% and save energy to15-20%

3.Installed the auto feeding and discharging, it is easy to handle and safe in the process of operation

4.There is no pollution to the environment because of advanced dedusting system

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Products Certification: