We can use plastic recycling systems to do a lot of things, such as making pyrolysis oil and plastic particles. Therefore, before buying the plastic recycling systems, we must choose the right system according to the final demand.
Beston plastic recycling systems mainly include pyrolysis systems and plastic granulator. The pyrolysis systems can turn waste plastic into pyrolysis oil, carbon black. The plastic granulator can be used to make all kinds of particles. You can read the following introduction about them:
Working explanation of plastic pyrolysis system:
Feeding the waste plastic into the reactor by manual or auto feeder, then fire the fuel to heat the reactor. After the temperature increase to relevant degree, the oil gas will be generated and enter the gas separator. Here, the heavy components will be liquefied and drop into the heavy oil tank. And light oil gas will rise into the oil condenser being liquefied and get into the oil tank. The unliquefied combustible gas enter the hydroseal , in here , after desulfuration and purification , one part of it will be recycled to heat the reactor, another part will be burn out to reduce the pressure while the pressure is too high.
Application of pyrolysis products:
|1||Fuel oil||• can be sold directly.|
|• Reprocessed into diesel and gasoline by waste oil distillation machine.|
|• can be used as fuel.|
|2||Carbon black||• can be sold directly.|
|• Reprocessed into high quality carbon by the carbon black processing machine.|
|• make carbon brick by briquetting equipment.|
|3||Combustible gas||• can be as fuel heating the reactor.|
|Daily capacity||6 MT||10 MT||20 MT||30MT,40MT,50MT|
|Raw material||Waste tires,rubber,plastic,oil sludge,medical waste.|
|Working method||Batch||Semi-Continuous||Fully continuous|
|Operating pressure||Constant pressure|
|Reactor rotate speed||0.4 turn/minute||Not rotary type|
|Total power||24 kw/h||30 kw/h||54 kw/h||53.6,62,84(kw/h)|
|Space (L*W*H)||20*10*10 m||25*15*10 m||25*15*10 m||20*15*10m,33*15*10m|
The working process of plastic granulator:
The first step, we need classify the waste plastic, and then cleaning and crushing them.
The second step, After being processed in the host, we can get plasticized material from the auxiliary engine.
Then, the cooling system will cool them down before they are cut into granules.
1. After being classified, crushed and cleaned, there is no need to dry the plastic waste, because this machine can handle the both wet and dried material.
2. The whole working process is continuous, so it can help you save time and money.
3. During the working process, it makes use of the high pressure to heat, so it is energy-saving.
4. The automatic power distribution system can ensure the motor work in a safe environment.
|Extruder screw diameter||85||100||130||160||mm|
|Main motor of extruder||55||90||132||160||kw|
|Main motor of compacting machine||37||55||75||90||kw|
No matter what kind of plastic recycling system you want to buy, we will guarantee the quality of products and provide first-class after-sales service. Don’t hesitate to contact us, please leave a message at any time.
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours. Thanks