Carbon Black From Tyre Pyrolysis

BMF series of Carbon Black Processing Machine in pyrolysis industry: 

The coarse carbon got from pyrolysis system is about 50-60 mesh, the carbon black processing plant is aimed to process the coarse carbon into 325 mesh or more, to reach a N grade carbon quality, the final products will be close to N330, which can be used in the basic plastic and rubber industry as fortifier, filler, and colorant, such as, to produce: rubber seals, rubber belt, plastic products, pigment, etc.

BMF-30 Carbon Black Processing Plant

BMF series of Carbon Black Processing Machine in other industry:

This plant is suitable for producing minerals powder, which is widely used in the fields of mining, metallurgy, chemical, construction and mining industry. It can be used for grinding barite, limestone, porcelain, slag and other materials that Moh’s hardness is below 9.3, humidity is in 8%, and non-flammable non-explosive minerals. The final product size can be adjusted as required in the range of 80~425 meshes. And the special coarse powder device (30-80mesh) is also available.

carbon black

Product Advantages:

1. Add high pressure spring device to improve ground pressure , Compared with traditional Raymond mill, with same power, it can produce 10-20% more powder.

2. Easy to adjust final size (from 0.613mm to 0.033mm).

3. Reasonable grinding device designation, stable operation.

4.Adopt eclipsed form multilevel seal, good sealing properties.

5. Dedusting efficiency measures meet the national standard. Super durable material adopted in wearing parts, long serving life, low maintenance.

The test report of the pyrolysis carbon after grinding:

Inspection Item Measured Value Test Standard
Iodine absorption value g/kg 129 GB/T3780.1-2006
DBP absorption value10-5 m3 ∕kg 85 GB/T3780.2-2007
CTAB sorption ratio superficial area  103 m2/kg 50 GB/T3780.5-2008
nitrogen sorption ratio  superficial area 103 m2/kg 54 GB/T10772-2003
Weight loss on heating(125℃) % 0.7 GB/T3780.8-2008
Ash(825℃) % 23.1 GB/T3780.10-2002
pH value 8.5 GB/T3780.7-2006
Impurity   % none GB/T3780.12-2007
volatile component % 7.6 GB/T7047-2006
Tensile Strength Mpa -11.7  

GB/T3780.18-2007

Maximum elongation   % -10
Mode BMF-10 BMF-20 BMF-30
Ring Size(DXH)(mm) 780*150 830*140 950*170
Rotating Speed of Main Mill(r/min) 160 150 130
The final Size(mesh) 325 325 325
Capacity (KG/H) 150 600 1500
Power of Main Frame(KW) 18.5 22 37
Power of Air Blower(kw) 15 22 30
Power of Classifier(KW) 2.2 4 5.4
Dimension (mm) (L X W X H) 4300*3500*5100 5300*4100*5200 7100*5900*7900

Product Certification:
22_03
22_05